AgIron 53 Consignment Event
Equipment Consignment| Time: | 10:00 AM |
| Date: | Wednesday December 9, 2009 |
| Location: | West Fargo ND, USA 58078 |
| Online Bidding: | www.steffesauctioneers.com |
Sale Bill
|
AGIRON 53 CONSIGNMENT EVENT NOTE: Auctioneers will run multiple rings with two live online rings powered by IQBID.COM. Registration and details on our website: www.steffesauctioneers.com. Equipment removal by Friday, Dec. 11, unless other arrangements are made. Hauling and loading are available. Contact auctioneers for owner information, new consignments, or changes at (701) 237-9173 or (800) 726-8609.
Please note that changes or additions to this listing are highlighted in yellow to assist you in finding new items or corrections. TRACK TRACTORS 2002 JD 9520T, ps, 4 hyd., 3 pt., Greenstar ready, 36" tracks, hrs. unknown, S/NRW9520T901112 2003 JD 9420T, powershift, 4 hyd., HID lights, AutoTrac ready, front suitcase weights, wide swing drawbar, 36" belts, 3,500 hrs. 1997 Case-IH 9370 Quad Trac, CAH, powershift, 4 hyd. with Case drain, auto steer ready, front weights, approx. 6,400 hrs., undercarriage 80%, (1) new belt, others 70%, complete maintenance records available 4WD TRACTORS 2003 JD 9520, ps, deluxe cab, 4 hyd., instructional seat, HID lights, 3,000 lb. weights, 710/70R42 duals, 3,800 hrs., S/NRW9520P011111 1994 Ford NH 9880, 4WD, 4 hyd., front weights, rear top & bottom weights, performance monitor, 7,100 hrs., 710 Trelleborgs, 60% rubber, S/ND101656 1995 Case-IH 9250, powershift, 4 hyd., diff lock, 18-4-42 duals, 9,431 hrs., S/N2016879 2002 NH TV140 bi-directional, 3 pt., draw bar on both ends, aux. hyd. on front, PTO, 480/85R34 tires, 3,779 hrs. with Miller bucket & grapple, S/N19559 1998 NH TV140 bi-directional, 3 pt., draw bar on both ends, aux. hyd. on front, PTO, 16-9-38 tires, 2,780 hrs. with Peloquin bucket & grapple, S/N203821 Case-IH 2670, 4 hyd., powershift, 20-8-34 duals, S/N8793265 1978 Versatile 875, 12 spd. gear, 4 hyd., 20-8-38 duals, 14,753 hrs., S/N52844 1985 Versatile 876, 12 spd. gear, 4 hyd., 18-4-38 duals MFWD TRACTORS 2006 JD 8330, ILS front, powershift, Active seat, HID lights, deluxe cab, deluxe comfort, 5 hyd., 3 pt., quick hitch, 3 PTOs, 450 lb. rear weights, front suitcase weights, AutoTrac ready plug & play, 380R54 press steel duals, 90% rubber, 380R38 front factory duals, fenders, 2,600 hrs. 2004 JD 7920, IVT, 4 hyd., 3 pt., PTO, Active seat, HID lights, quick hitch, AutoTrac ready, 320-80R50 press steel duals, 2,300 hrs. 2003 JD 8320, ILS front, powershift, Active seat, HID lights, deluxe cab, deluxe comfort, 5 hyd., 3 pt., quick hitch, 450 lb. rear weights, front weights, AutoTrac ready plug & play, 380R50 press steel duals, 380R34 front factory duals, front fenders, 4,080 hrs. 2004 JD 8420, ps, 4 hyd., 3 pt., 1000 PTO, Greenstar ready, 14-9-46 tires & duals, 320/85R34 fronts, 5,145 hrs., S/NRW8420P028323 2008 JD 7730, deluxe cab, AutoTrac ready, IVT, right hand reverser, 3 hyd., 3 pt., 540/1000 PTO, 380-90R50 tires & duals, 320/85R38 fronts, 226 hrs., S/NRW7730D009600 1994 JD 4960, powershift, 4 hyd., 3 pt., quick hitch, PTO, 14-9-46 press steel duals, 14-9-30 fronts, front weights, 10,100 hrs., S/N5601 1986 Case-IH 3394, powershift, 4 hyd., 3 pt., PTO, new 380-85R46 tires & duals, 11,214 hrs. 1979 Ford 1500, syncro, 3 pt., PTO, turf tires, 896 hrs., S/N502997 2WD TRACTORS 1975 JD 4630, powershift, 2 hyd., 3 pt., 1000 PTO, aux. fuel tank, 18-4-38 band duals, 8,677 hrs., S/N15420 1973 JD 4630, syncro, 3 hyds., 3 pt., PTO, 20.8x38 singles, S/N4630W003061 JD 4630, 3 hyd., (2 converted), 5,112 hrs., S/N005227R 1974 JD 4430, quad range, 3 hyd., 3 pt., quick hitch, 540/1000 PTO, 14-9-38 singles JD 4520, syncro shift, Year Round cab, 2 hyd., 3 pt., 1000 PTO, fenders, lights, with JD 158 loader 1979 JD 2440, open station, ROPS, diesel, 60 , 2 hyd., 3 pt., PTO, with JD 146 hyd. loader, 3,932 hrs., S/N324887 1964 JD 4010, diesel, hyd., 3 pt., 540 PTO, fenders, new brakes, complete hyd. OH, new paint, nice tractor 1961 JD 4010, diesel, open station, 2 hyd., 3 pt., 540 PTO, 15-5-38 singles 11613 1983 Ford 6610 with 1995 Kuhn disc mower, DNR machine, 3,485 hrs., excellent service, S/NC708677 1968 IHC 856, diesel, 2 hyd., 3 pt., 540/1000 PTO 1974 IHC 766, cab, heat, diesel, 2 hyd., 3 pt., PTO, 18-4-38 rear singles, S/N24901804012991 1964 IHC 706, open station, gas, 1 hyd., 3 pt., PTO, 18-4-34 rear singles, shows 7,030 hrs., S/NNA10950 1974 Oliver 1655 with Koyker loader, S/N262908-490 AC D17, wide front, power steering, spin out rear wheels, 16-9-38 tires 1954 AC WD, wide front, operators manual, S/N174369 1959 Case 600-B, gas, wide front, 12 spd. hand clutch, power steering, 3 pt. 1941 Farmall H tractor with Woods L306 belly mower Ford 800 Jubilee engine doesn't run IHC Super M, wide front, hyd., PTO 1944 IHC H, narrow front, 12v system, 40% rubber, restored 1949 JD B, narrow front, PTO MM 4 Star, wide front, power steering, 3 pt., 15-5-38 tires IHC M, narrow front, good paint, S/N278649X1 SPRAYERS 2009 Apache AS1010 self-propelled sprayer, 215 Cummins, 6 spd. powershift, 120” fixed axle, 1,000 gal. tank, 100' boom, foam marker, fence row left & right nozzle, autoboom ultraguide, Smartrax auto steer, Accuboom, auto shut-off, 380-80R-38 fronts, 380-90R-46 rears, hyd. suspension 2000 Ag Chem 854 Rogator, 1,000 gal. SS tank, 90' boom, 50 gal. rinse, hyd. tread adj., triple nozzle, Raven monitor, foamer, GS harness, 320R46 tires, 90% rubber, 2,175 hrs. 2003 Redball 680 sprayer, 132' boom, 1,600 gal. tank, rinse tank, hyd. drive pump, Raven 450 controller, 320-38 duals, 88" minimum wheel spacing, S/N03-01787 2001 Hardi Commander pull-type sprayer, 80' boom, 1,200 gal., triple nozzle, Raven 471 auto rate monitor, 14-9-46 singles, PTO pump, hyd. full controls, rinse tank Melroe 115 spra-coupe, 160 gal., 52' boom Summers sprayer, 3 pt., 60', 500 gal. tank COMBINES 2008 JD 9770 STS, high torque reverser, high cap. unload, deluxe controls, 20-8-42 duals, 650 sep. hrs. 2006 Cat Lexion 580R, straddle duals, Cebi monitor system, Quantum yield monitor with printer, HPV variable speed feeder house, rear wheel drive, 3D sieve system, long auger, 230 sep. hrs., 420 engine hrs., single owner, S/N57600358 2004 JD 9760 STS, deluxe controls, Contourmaster, high unload pkg., Greenstar Y&M, 18-4-42 straddle duals, 18-4-26 rears, 1,200 sep. hrs., 1,628 engine hrs. 2003 JD 9650 STS, straw chopper, rock trap, fore/aft, header height control, reel speed control, grain tank ext., 18-4-42 duals, 1,680 sep. hrs., S/NH09650S700639 2004 Case-IH 8010, rock trap, chopper, long auger with Stewart extender, elec. adj. sieves, Pro 600 color display with Y&M, HID lights, all updates, rotor balanced, new rotor bars, 9:00 metrics, 540 rears, 1,235 sep. hrs., 1,653 engine hrs., S/N105374 2005 Agco Gleaner R65, auto header height, reel speed, fore/aft, Field Star mapping, Y&M, Sunnybrook rotor, low hrs. on new engine, completely reconditioned, 8:00 metric singles, heavy duty adj. rear axle, 1,459 sep. hrs., 2,226 engine hrs. 1998 Agco Gleaner R72 auto header height, reel speed, fore/aft, ext. reconditioning, 30-5-32 singles, 1,660 sep. hrs., 2,427 engine hrs. 1995 Case-IH 2188, axial flow, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 2,532 sep. hrs., 3,325 engine hrs., S/N189834 1997 Case-IH 2188, AFX rotor, dual speed cyl., hopper ext., grain loss monitor, 30.5-32 singles, 3,919 sep. hrs., 5,130 engine hrs., S/NJJC0193772 1995 Case-IH 2188, specialty rotor, AHH, RS, grain loss monitor, Crary Big Top, new reverser, 30-5-32 singles, HD rear axle, 2,498 sep. hrs., 3,454 engine hrs., S/NJJC0118907 1994 Case-IH 1688, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,343 engine hrs., S/N121880 1994 Case-IH 1688, specialty rotor, rock trap, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,850 engine hrs., S/N121707 1994 Case-IH 1688, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 3,437 engine hrs., S/N121084 1994 Case-IH 1688, axial flow, specialty rotor, rock trap, chopper, 2 spd. hydro, field tracker, long unload auger, AHH, RS, fore/aft, 30-5-32 singles, Gorden bars, 3 strand feeder, AFS yield & moisture, 4,900 engine hrs. 1992 Case-IH 1680, specialty rotor, rock trap, chopper, AHH, grain loss monitor, 30-5-32 singles, 14-9-24 rears, 4,133 engine hrs., S/N117249 1992 Case-IH 1680, axial flow, specialty rotor, rock trap, chopper, AHH, RS, fore/aft, 30-5-32 singles, 14-9-24 rears, 2,400 sep. hrs., 3,100 engine hrs. 1997 JD 9600, DAM, DAS, chaff spreader, long auger, 30-5-32 singles, 14-9-24 rears, S/N671428 1994 JD 9600, DHH, fore/aft, DAS, long auger, 30-5-32 singles, 14-9-24 rears, chaff spreader, 3,660 sep. hrs., 5,331 engine hrs. 1990 JD 9600, DAM, DAS, 20' unload auger, chaff spreader, 30-5-32 singles, 14-9-24 rears, S/N637634 1985 JD 8820 Titan II, AHH, air sieve, hyd. fore/aft, 30-5-32 singles, 6,341 hrs., S/N611137 JD 6600, diesel, gear drive, new cyl. bars, radiator 1,000 acres ago 1978 MF 550, Perkins 354 diesel, chopper, tall hopper, variable speed, 18-4-26 tires, 2,900 hrs., mostly stored inside, good condition, S/N00133
GPS EQUIPMENT JD SF1 GPS system with globe and 2600 screen CORN HEADS 2006 Geringhoff corn head, 12x22”, 60 Series drives, S/N915761222 2005 Geringhoff RD corn head, 12x22”, hyd. deck plates, header height, stubble lights, S/N2512221B 2004 Geringhoff RD corn head, 12x22”, hyd. deck plates, header height, stubble lights, S/N92114122B JD corn head, 12x22”, PTO hookups, field ready Agco Hugger corn head, 8x30”, new chopping rolls Caterpillar corn head, 12x30”, knife rolls, hyd. deck plates, mounts for Case-IH 8010 2001 JD 1290 corn head, 12x20", S/N695708 1998 JD 1290 corn head, 12x20”, low profile, poly, standard rolls, standard deck plates, S/NX675672 JD 1241 corn head, 12x22”, GVL poly 6000 JD 843 corn head, 9x22”, low tin, oil drive JD corn head, 12x22", 50 Series hookups, poly snouts, (1) extra snout FLEX HEADS 2007 Cat Lexion F535 flex head, S/N44100434 2005 JD 635F flex head, 35', poly snouts, 70 Series hookups, full finger auger, S/NH00635F712085 2005 JD 635F flex head, 35', poly snouts, 60 Series hookups, poly auger fingers, tall DAM, S/NH00635F710968 2005 JD 630F flex head, 30', poly snouts, 70 Series hookups, full finger auger, low DAM, Crary air reel, S/NH00630F710794 2003 JD 930F flex head, 30', poly snouts, full finger auger, 50 Series drives, S/NH00930F701495 2001 JD 930F flex head, 30', poly snouts, full finger auger, 50 Series drives, S/NH00930F691496 1998 JD 930 flex head, 30', poly snouts, 10 Series drives, S/NH00930F677378 1981 JD 224 flex head, AHH, poly skids, telescoping shafts, S/N475475 JD 224 flex head, steel fingers, stainless steel tin bottom JD 224 flex head, S/N544433 JD 220 flex head, steel fingers, auto header height 1999 Case-IH 1020 flex head, Crary air reel, fore/aft, poly, S/N319704 1997 Case-IH 1020 flex head, poly bottom, 30', fore/aft Agco Gleaner R Series flex head, 24', poly bottom MF flex head, 20’, S/N1859-68934
STRAIGHT HEADS 2004 Agco 8000 straight head, 30', bat reel, fore/aft, 600 acres on new guards & sections 1995 Case-IH 1010 straight head, 30', bat reel, fore/aft, S/N200780
1994 Case-IH 1010 straight head, 25’, SSR Pump 9” pans, S/N128605 JD 930 rigid platform, (3) Sund 9' pickup platforms, AHH, screen bottom JD 224 straight head, pro plates, bat reel Deutz straight head, 27', with 9” sunflower pans, S/N8787 MF straight head, 16', S/N1859-61965 1986 Case-IH 1010 straight head, 25’ PICKUP & OTHER HEADS 2001 Cat G13 platform with Rakeup platform Agco 400 pickup head, Westward 388 pickup Agco 400 pickup head, Westward 436 pickup 1994 JD 914 pickup head, JD 7-belt pickup, S/N665396 1982 JD 212 pickup head, JD 6-belt pickup, S/N438632 JD 212 pickup head, 6-belt JD pickup, S/N585142 MF pickup head, 10', Melroe rubber belt pickup MF pickup head, 10' Melroe steel Sund pickup, 20', S/N1486-11384 JD all crop head, 8x22", conversion head, S/N295342H Agco sunflower head, 27', 12” pans Universal UH22 bean head, 22’, 8-bar pickup, S/N390049 1991 Case-IH 1015 pickup head with Melroe 388 pickup 1986 Case-IH 810 pickup head
SWATHERS JD 580 pull-type swather, 25', bat reel Premier pull-type swather, 21', auto fold, finger reel GRAIN CART & GRAVITY BOXES 2006 Brent 1084 grain cart, 1,050 bu., roll tarp, 480/80R42 duals, S/NB22750121 JD 1210A grain cart, 400 bu., 1000 PTO, roll tarp Dakon gravity box, 150 bu., running gear (2) Parker gravity boxes, 125 bu., running gears SKID STEERS 2006 Caterpillar 246B skid steer, aux. hyd., 202 hrs. 2006 Caterpillar 226B skid steer, aux. hyd., 404 hrs. 2005 Caterpillar 287B track skid steer, cab, aux. hyd. 2002 Melroe T190 track skid steer, aux. hyd., 2,200 hrs., S/N519313266 2001 JD 270 skid steer, cab, heat, aux. hyd., new tires, std. bucket 2001 NH LS180 skid steer, ROPS, 2 spd., aftermarket hand controls, std. bucket, 12-16.5 rubber, 2,536 hrs. NH LS170 skid steer, cab, aux. hyd. 1985 Rounder L1000 skid steer, gas engine, standard bucket 1999 Bobcat 873 skid steer, cab, heat, front hyd., hand controls, 2,605 hrs. 1981 Gehl 3510 skid steer, Ford 4 cyl. gas, standard bucket, manure fork, grapple, 3,000 hrs., new engine & radiator JD 240 skid loader, aux. hyd. Bobcat 753 skid loader, non-runner Caterpillar skid loader track assembly, like new Caterpillar wheel loader quick tach fork assembly Pallet forks, 4' Pallet forks, 5' Box blade, 84” LOADERS JD 840 heavy duty loader, 96” bucket, armrest joystick control, mounts for 8000 Series Davis quick tach loader, mounts, 6' bucket Dual 250 loader for IHC 560 Du-Al 340 hyd. loader, grapple & control valves with brackets for JD Ford 700 quick tach loader Ford 420 skip loader with box blade HEAVY EQUIPMENT Caterpillar D5HLGP High Track with pyramid pads, 33,000 lb., 6,000 hrs., new undercarriage 2003 IR BL475 backhoe loader, quick change bucket, canopy, SS, hoe bucket, front aux. hyd., 9,640 lbs. gvw, 491 hrs., S/N571911013 2000 Sky Trac 154 telescoping forklift, diesel, 10,000 lb. lift, 54', heated cab, 3,500 hrs., 4 months extended warranty 2000 NH LM850 rough terrain forklift, open cab, diesel, 10,000 lb. cap., ext. boom to 39’ 2000 SkyJack 3219 scissor lift, 32” wide, 25' working height, non-marking tires, built-in charger 1999 Komatsu SK60 trackhoe, push blade, long stick, 40” bucket, 17,000 lb. weight, good undercarriage 1995 JD 690ELC excavator, 72” ditching bucket, 8,000 hrs., extensive reconditioning with records JD 490D excavator, std. stick 1995 Pettibone telehandler, diesel, front tires filled with foam, 2 wheel, 4 wheel & oblique steering, leveling 8,000 lb. lift 1998 Komatsu DX65P low ground pressure Cat, wide tracks, 6 cyl. engine, 155 hp 1989 Komatsu D68E dozer, 180 , 4-way blade, 6,000 hrs., new undercarriage 1987 JCB rubber tire backhoe, cab, diesel, 2WD, 18” trench bucket JD 444G wheel loader, enclosed cab, GP bucket, 15-5-25 tires 1984 Ford 555A loader backhoe, XL Extend-a-hoe, DNR machine, 2,728 hrs., excellent service 1976 JD 450E dozer, 6-way blade with guards, 2,000 hrs. Caterpillar 318 backhoe general purpose bucket Caterpillar push blade, off 433 sheepsfoot packer Galion 150A rough terrain crane, 15 ton Hough R30 wheel loader, power steering, 1 yd. bucket, new clutch & starter 1978 Ford A64 front end loader, 2-1/2 yd. bucket, DNR machine, excellent service, S/NC587210 1967 Hough 50C payloader, 301 gas, 3rd valve, 1-1/2 yard bucket, 4-tine grapple, 7,000 hrs. Dyno Pack vibratory packer, 84” (2) Rome construction discs, 10’, 11” spacing, 20 blades Ditch Witch backhoe attachment, fits R65/6510, may fit others 2005 Stanley 3500 hyd. breaker, mounted on Bobcat quick tach plate 2000 JRB JRB/JKHB 1500 hyd. breaker, worked last time used FORKLIFTS 2000 Caterpillar TH63, enclosed cab, heat, 42', 4x4, 3-way steer 2005 Daewoo G25E forklift, pneumatic tires, 188" lift, 3-stage mast, side shift, dual fuel 1995 IR RT708G forklift, 3.8 liter Cummins, 75 , 15' mast, 6,000 lb. lift, 4' forks, 2 stage hyd., 18-4-24 fronts, 11L-16 rears, 15,000 gvw MF F2500 forklift, tractor-style Carelift 4,000 lb. forklift mast with forks & quick tach NON-SLEEPER SEMI TRACTORS 2006 Kenworth T600 twin screw, C13 Cat, 10 spd., sliding 5th, flex ride susp., daylight doors, 24.5s on polished aluminum, new virgin tires 2005 Kenworth T800 twin screw, Aerocab Ext cab, VIT interior, Cummins ISM, 370 hp, engine brake, 12 spd. auto shift, 4.11 ratio, air ride cab, air ride susp. with dump valve, 180” WB, sliding 5th, 22.5s on all aluminum 2005 Freightliner Columbia twin screw, Detroit 14L, 515 hp, auto shift, 180” WB, 24.5s on polished aluminum (2) 2004 IHC 9200I twin screw, C12 Cat, auto shift, 205” WB, 22.5s on polished aluminum 2004 Freightliner Columbia twin screw, C15 Cat, 10 spd., stretched & double-framed for 21' box, 22.5s on aluminum (2) 2002 IHC 9400I twin screw, Eagle interior, Cummins ISM, 370 hp, 10 spd., 187” WB, 22.5s on polished aluminum 2002 Freightliner Columbia 120 twin screw, Detroit, 470 hp, engine brake, 10 spd., air liner susp., 3.42 ratio, 12,000 lb. fronts, 40,000 lb. rears 2002 Freightliner CL120 Columbia twin screw, Cummins ISX, 475 hp, engine brake, 10 spd., 3.90 ratio, 40,000 lb. rears, 235” WB, 24.5s on aluminum 2001 Freightliner 106 twin screw, Detroit, 9 spd., 22.5s 2000 IHC 9100 twin screw, C10 Cat, 350 hp, 10 spd., 22.5s with polished aluminum front 2000 Freightliner 120 twin screw, 3406 Cat, 10 spd., engine brake, 22.5s, aluminum fronts 2000 Freightliner Century twin screw, Cummins ISM, 10 spd., 22.5s, aluminum all around 2000 Peterbilt 377, day cab, steerable pusher, C12 Cat, 13 spd., headache rack, wet kit, 617,000 miles 1999 IHC 9100 twin screw, N14 Cummins, 10 spd., 22.5s, aluminum fronts (2) 1999 Freightliner FLD112 twin screw, C12 Cat, 10 spd., air ride, low miles 1999 IHC 9200 twin screw, M11 Cummins, 370 hp, 10 spd., air ride, 180” WB, 22.5s on discs 1999 IHC 9200 twin screw, C12 Cat, 380 hp, 10 spd., air ride, 215” WB, 22.5s on discs 1999 Kenworth T800 C12 Cat, 410 hp, 10 spd., 3.70 ratio, 12,000 lb. fronts, 40,000 lb. rears 1998 Volvo VNL twin screw, M11 Cummins, 370 hp, 10 spd., 22.5s, aluminum fronts 1998 Freightliner FLD121, factory day cab, Detroit 11 liter 60 Series, 350 hp, Spicer trans., 7 spd. Rockwell rear end, 2:93 ratio, 171” WB on steel, 12,000 lb. front, 40,000 lb. rear, A/C, cruise, approx. 700,000 miles 1998 Freightliner FLD120 factory day cab, Detroit 11 liter 60 Series, 350 hp, Spicer trans., 7 spd. Rockwell rear end, 2:93 ratio, 171” WB on steel, 12,000 lb. front, 40,000 lb. rear, A/C, cruise, approx. 700,000 miles 1997 Volvo twin screw, 60 Series Detroit 12.7 liter, 10 spd., 4:33 ratio, 24.5s, steel discs 1997 Freightliner 112 twin screw, M11 Cummins, 10 spd., sliding 5th, 22.5s, polished aluminum around 1997 IHC 9400 day cab, N14 Cummins, Red Top, 470 hp, Super 10 spd., air slide 5th, air ride susp., 160” WB, low pro 24.5 tires 1997 Volvo WG single axle, VED 12, 10 spd., air ride 1996 IHC 8300 twin screw, Detroit 60 Series, 10 spd., low miles 1996 Freightliner FL70, single axle day cab, Cummins 8.3 liter, Allison automatic, 150” WB (2) 1995 Volvo twin screw, 60 Series Detroit, 10 spd., engine brake, 22.5s, steel discs 1995 Volvo twin screw, M11 Cummins, 9 spd., 24.5s on steel discs 1995 Ford LTA9000 AeroMax, twin screw, M11 Cummins, 370 hp, 10 spd., air ride susp., 12,000 lb. front, 40,000 lb. rears, 4.11 ratio, 167” WB, 591,496 miles 1995 IHC 8200 single axle, M11 Cummins, 10 spd., 12,000 lb. fronts, 23,000 lb. rears 1995 Kenworth T800 twin screw, M11 Cummins, 10 spd., air ride, 12,000 lb. fronts, 40,000 lb. rears 1995 IHC 8200, day cab 1994 Freightliner F70 single axle, Cummins 8.3L, 150” WB 1992 Kenworth T800, M11 Cummins, 10 spd., wet kit, 140" WB, light truck 1991 Freightliner FLD120 factory day cab, 3406 Cat, 8 spd. with low hole, spring ride, recent shoes & brake drums 1991 Kenworth T600 twin screw day cab, 60 Series Detroit, Eaton 10 spd., air ride, wet kit, 11-22-5 on steel 1990 Freightliner FLD120 twin screw, day cab, 270 hp Cummins, 10 spd., PTO, spring ride, 12,000 lb. fronts, 34,000 lb. rears, 3.73 ratio, 180” WB, 22.5 rubber 1990 Kenworth T800 twin screw tri-axle with lifting front, 3406 Cat, 10 spd., 24.5s, aluminum fronts 1984 Ford L9000 day cab, 855 Cummins, 300 hp, 9 spd., spring ride, 11-24-5 on steel, air slide 5th, current DOT, OH engine 1984 Kenworth, day cab, C12 Cat, 15 spd., long frame 1977 Mack R, factory day cab, 238 engine, 5 spd., power steering, wet kit 1975 Ford LT9000 day cab, 290 Cummins, 13 spd., fixed plate, spring ride, 10:00-20 rubber on spoke wheels SLEEPER SEMI TRACTORS 2005 Freightliner Columbia twin screw, Detroit 14L, 515 hp, auto shift, 24.5s, polished aluminum 2005 Peterbilt 379 EXHD, 63” sleeper, C15 Cat, 475 hp, 10 spd., 265” WB, dual chrome air cleaners & exhaust 2005 Volvo VNL, sleeper, Cummins ISX, 450 hp., 10 spd., A/C, 12,500 lb. fronts, 40,000 lb. rears, air ride, 3:36 ratio, 215" WB, 606,173 miles, blue (2) 2004 IHC 9200I twin screw, C13 Cat, auto shift, 22.5s, aluminum fronts 2004 Freightliner Columbia mid roof, 470 hp Detroit, auto shift, 22.5s, polished aluminum around 2003 Kenworth T800 twin screw, midroof, C15 Cat, Fuller 10 spd., engine brake, daylight doors, 22.5s, polished aluminum fronts 2003 Freightliner Coronado double bunk, 14L Detroit, 515 hp, RTLO 10 spd., sliding 5th, 22.5s, aluminum all around 2003 Peterbilt 379 ext. hood, 475C-15 Cat, 13 spd., 3:36 rears, air ride, air slide, full aluminum 2003 Freightliner Columbia mid roof, Cummins ISX, 10 spd., 22.5s, aluminum fronts 2003 Mack CH613 mid roof, 460 hp, 13 spd., air ride, 11-24-5s on aluminum, slight body damage 2002 Volvo VN 420, 42” flat top sleeper, 425 hp, 10 spd., 24.5 low profile, all aluminum wheels, 205” WB, air ride, AC, PS, power & heated mirrors, pintle hitch, low hole (2) 2002 IHC 9200I twin screw, 51” Pro Sleeper, C12 Cat, 410 hp, 9 spd., 3.58 ratio, 40,000 lb. rears, 207” WB, Premium interior, 22.5s on discs 2002 Kenworth W900L, Aerodyne 72” sleeper, Cummins ISX, 500 hp, jake brake, 13 spd., air ride, alum wheels, dual exhaust, dual air cleaner, VIT interior, 260” WB (2) 2001 IHC 9200 twin screw, 51” Pro Sleeper, C12 Cat, 10 spd., 205” WB, polished aluminum fronts 2000 Volvo VNL 660 twin screw, D12, 425 hp, 10 spd., 3.70 ratio, 22.5s on aluminum 2000 Volvo VNL twin screw, mid roof, D12 Volvo, 465 hp, 13 spd., jake brake, heated mirrors, new 5th wheel plate, 22 low pros on aluminum, 3:55 ratio, 1,127,000 miles, fresh DOT 2000 Kenworth T2000, 75” standup, Cummins ISX, 400 hp, aluminum wheels, air ride, 230” WB 1999 IHC 9400 Eagle twin screw, Pro Sleeper, N14 Cummins, auto shift, 212” WB, 22.5s, polished aluminum 1999 Kenworth W900L 465 hp Detroit, 13 spd., 3:55 rears, air ride, air slide, recent engine OH with papers, full aluminum 1999 Peterbilt 379 removable bunk, 3406 Cat, 10 spd., 24.5s, aluminum fronts 1999 Kenworth T2000, twin screw, double bunk, 3406E cat, 475 hp, 13 spd., air ride, sliding 5th, leather seats, refrigerator, 24.5s on all aluminum, 40,000 miles on new injector & cam, 20,000 miles on new clutch 1999 Peterbilt 379 twin screw, Cat, 550 hp, 15 spd., 255” WB 1998 Freightliner FLD112, 54” mid-roof, C12 Cat, 410 hp, 10 spd., 4:11 rears, jake brake, 228” WB, 11R24-5 tires, new radiator, new turbo, recently new rods & mains, dual 100 gal. tanks, maintenance records available 1998 Volvo V10 twin screw, mid roof, D12 Volvo, 425 hp, 13 spd., new 5th wheel plate, 3:55 ratio, 11-24-5 on aluminum, (4) new batteries & new clutch, 200,000 on rear ends, 800,000 miles on motor, fresh DOT 1998 Freightliner FLD120, 72” condo, N14 Cummins, 460 hp, jake brake, 10 spd., air ride, 230” WB 1997 Freightliner 120 twin screw, flattop, N14 Cummins, 9 spd., engine brake, aluminum wheels around 1997 IHC 9300 Pro Sleeper, N14 Cummins, 13 spd., air ride, cruise, jake brake, diff, 24.5 low pros on aluminum, 230" WB, headache rack, fenders, rear hitch, new steers 1996 Kenworth T800B twin screw, 36" flattop, M11 Cummins, 10 spd., 3.90 ratio, wet kit, daylight doors, 22.5s, aluminum around 1996 Volvo WIA64 tandem axle, flattop sleeper, VED12 Volvo, 425 hp, 10 spd., air ride, 3.70 ratio, 40,000 lb. rears, 24.5 low pros on aluminum 1996 IHC 9400 twin screw, mid-roof sleeper, Detroit 60 Series, 10 spd., 232” WB, 12,000 lb. fronts, 40,000 lb. rears 1996 IHC single axle, sleeper, Cummins diesel, 9 spd., new batteries, new tires, (2) fifth wheels, extra bottom half of motor all redone, heated mirrors, cruise control, like new 1995 Volvo WIA64 D12 Volvo, 425 hp, Super 10 spd., air ride, 3:70 rears 1994 Volvo WIA64TES 12.7 Detroit, Super 10 spd., air ride, 3:70 rears 1991 Peterbilt 379, 500 Detroit, 13 spd., 7" straight pipes, Texas bumper, teardrop headlights, 3:73 rears, all aluminum wheels, (8) new drive tires, black 1991 Freightliner twin screw, flattop, removable sleeper, Cummins 6 cyl., 9 spd., A/C, engine brake, air ride seat, sliding 5th, 24.5 Daytons, 698,000 miles 1990 Peterbilt 379 ext. hood, 425 Cat B, 13 spd., 3:55 rears, air ride, air slide, recent engine OH with papers, full aluminum 1997 Peterbilt 377, sleeper, 3406E Cat, 9 spd., set forward axle, 24.5s on low pros 1988 Kenworth T800, 42" sleeper, 350 Cummins, 9 spd., air ride, 3.90 ratio, approx. 780,000 miles 1987 Peterbilt conventional, removable bunk, 855 Cummins, 10 spd., air ride, air slide 5th, wet kit, air shift, 11-22-5 on steel, 400,000 miles
SPECIALTY TRUCKS 2005 Sterling Acterra single axle cab & chassis, factory day cab, C7 Cat, 210 hp., 6 spd., power steering, A/C, spring susp. 2002 IHC 4300 cab & chassis, DT466, automatic, 20' box specs, 22.5 tires 2000 IHC 4900 cab & chassis, DT466, automatic, 20' box specs, air ride, 22.5 tires 2001 Chevrolet 2500 HD crew cab utility truck, 4 door, 6.0 liter V8, automatic, 4WD, pintle hitch, Knapheide 8’ box, 140,000 miles 1998 IHC 2674 tandem axle, M11 Cummins, 300 hp, diesel, 8LL, rubber block susp., 4.33 ratio, 20,000 lb. front, 46,000 lb. rear 1996 Ford Louisville LT9513 boom truck, M11 Cummins, 310 hp., 8ll trans., 4 axle lift tag, 24' flatbed, Fassi F230 SE boom, 41' reach, 54” fork 1995 Isuzu NPR with 16' enclosed box, roll-up door 1995 Chevrolet 3500, 6.5 liter diesel, 5 spd., power steering, A/C, 2,700 lb. crane 11’ service body, 124,147 miles 1994 Peterbilt tri-axle twin screw, 12.7L Detroit, 10 spd., 17' dump body 1991 Kenworth T800 tandem axle, 3306 Cat, 300 hp, 8LL, Hendrickson susp., 20,000 lb. front, 40,000 lb. rear, long wheel base, 22.5 tires 1990 Ford F900, tandem axle, std. cab, 7.8 Ford, 210 hp, automatic, Hendrickson susp., 99,000 miles, Altec D1000-TR rear-mount with turret winch, S/N0590N0303, 47' sheave ht., 3 sec. hyd. boom, 2 spd. digger with 18" auger, 11,400 lift cap., 4 outriggers, 9 comp., heel winch, hyd. base reel, pintle hitch, 46,000 gvw 1990 Ford F750 fuel truck, Ford 6 cyl. diesel, 2,000 gal. tank with (2) pumps 1988 GMC Brigadier tandem axle rollback implement truck, BC4 Cummins, 315 hp, 9 spd., 4 spring susp., 12,000 lb. front, 40,000 lb. rear 1987 Mack Superliner, E7 Mack, 350 hp., 6 spd., power steering, spring susp., 16 ton Wilmar tender box, good runner 1986 Mack MR, COE, cab & chassis, 20,000 lb. front, 44,000 lb. rear, long wheelbase 1986 Ford L9000 gravel truck, 16' box, 20,000 lb. fronts, 40,000 lb. rears, very good mechanical condition 1978 Chevrolet C65 bulk fuel, 1,500 gal. cap., runs good 1974 IHC Loadstar 1700 twin screw 2-1/2 ton implement truck, gas, 8'x24' hyd. tilt bed & winch 1966 Ford F700 pole drilling truck, rebuilt 391 engine, 4&2 spd., Continental 6 cyl. pup motor, flatbed, all hyd., 20" auger 1994 Ford LT9000 plow truck, tandem axle, L10 Cummins, plow & wing 1980 Ford L8000 plow truck, single axle, Cat 3208, plow & wing Single axle yard spotter truck, automatic, hyd. 5th wheel, new paint, can be licensed and DOT'd Divco milk truck, circa 60's, for parts only Military track vehicle, Ford engine, 20 ton winch, hyd. boom, posthole auger GRAIN & BOXED TRUCKS 2004 IHC 9200 tri-axle twin screw, C13 Cat, auto shift, new Loadline 21' box, hoist, 22.5s, polished aluminum around 2003 Freightliner 112 twin screw, Cummins ISM, 10 spd., new 21' box, hoist 2001 Volvo VNM twin screw, Cummins ISM, 370 hp, 10 spd., new Magnum 20' box, hoist, polished aluminum around 2001 Freightliner 106 tri-axle twin screw, Detroit, 9 spd., 21' box, hoist 1995 Volvo WG64 quad axle, pusher & rear lift tag axle, M11 Cummins, 10 spd. OD, Volvo T-ride susp., 12,000 lb. fronts, 40,000 lb. rears, new 24' box, hoist, 3 pc. gate, rear dump, new heavy tread recaps, 315 on front 1994 Peterbilt tri-axle twin screw, 12.7L Detroit, 10 spd., 17' dump body 1990 Kenworth, Heavy Spec, 3306 Cat, 8LL trans., 20,000 lb. front axle, 46,000 lb. rears, spring susp., long frame 1975 Ford F880 tandem axle, 475, 5&2 spd., air brakes, 20' steel box, plumbed for drill fill, 10:00-20 tires, new fronts, 84,000 actual miles 1980 Mack Superliner twin screw with 3rd axle, 350 Mack, 9 spd., 22' box, hoist, combo gate, 11-24-5 rubber 2000 Volvo ACL64B tandem, M11, 400 hp, 6 spd. Allison automatic, 14' box, hoist, snow plow, sander, 58,000 gvw, 320,000 miles 2000 Volvo ACL64B tandem, M11, 400 hp, 6 spd. Allison automatic, 14' box, hoist, snow plow, 58,000 gvw, 315,000 miles 1980 Western Star twin screw gravel truck, 855 Cummins, 15 spd., spring ride, 16' aluminum gravel box, 11-24-5 tires 1970 GMC, 2-1/2 ton, 350, 2 spd., steel box, hoist, 41,000 miles 1968 Chevrolet C65, 366 V8, 5&2 spd., power steering, 16’ box, hoist, always stored inside 1964 Chevrolet 60 single axle, 2 ton, 283, 4 spd., 14-1/2' steel box, wood floor, 8.25 new grip tires SERVICE TRUCKS 2001 Ford F350 dually service truck, 1 ton, diesel, automatic, service box & crane 2001 Ford F350 dually, ext. cab, 7.3 liter diesel, 6 spd., 4WD, new steel flatbed with Class III & 5th wheel hitches, side toolbox, 180,000 miles 2000 IHC 4700 service truck, T444 diesel, automatic, 12' Altech service body, below deck air compressor, factory 110 inverter, air hose reel, wireless remote work light, 94,000 miles 1999 GMC C3500 dually, diesel, 5 spd., 3 yd. tipper box, hyd. hoist, tran. with only 70,000 miles 1995 Ford L8000 enclosed service truck, diesel, automatic, air compressor, 101,000 miles 1995 Chevrolet 3500 dually, 6.5L turbo diesel, 5 spd., maintainer flatbed service body, crane 1981 GMC Topkick service truck, Cat diesel, Allison automatic, Miller welder, gen set, air compressor, 400 gal. tank with pump 1975 GMC Sierra Grande 1 ton dually, 454, 3 spd. with low gear, service box, 12v, cherry picker & air compressor PICKUPS 2006 Ford F350, ext. cab, long box, 6.0 liter diesel, automatic, 4WD, Class III hitch, 36,000 miles, title marked damaged 2003 Ford F150, automatic, 4WD, elec. windows, tilt, cruise, 120,000 miles 2000 Chevrolet 3500, crew cab, long box, 454, 2WD, A/C, power windows/locks, cruise, 5th wheel hitch, 219,628 miles 2000 Chevrolet 2500, crew cab, 8’ box, 7.4 liter, automatic, 4WD, power windows/locks, leather, 144,310 miles 1999 Ford F350, crew cab, long box, 7.3 liter diesel, 4 spd. manual with OD, 2WD, A/C, 5th wheel hitch, 380,592 miles 1998 Chevrolet 3500, 1 ton crew cab, 4 door, 5.7 V8, automatic, 2WD 1998 GMC 2500, cab & chassis, gas, 2WD, 116,000 miles 1997 Ford F150, reg. cab, long box, 4.2 liter, automatic, 4WD, A/C, cruise, 113,424 miles 1997 Ford F150, 4WD, utility box 1992 Ford F150 ext. cab, long box, 302 V8, automatic, 4WD, new tires 1991 Ford F350 crew cab, automatic, Waldoch conversion, 4WD, 5th wheel ball, bad transmission 1986 Chevrolet Silverado, 350 V8, automatic, 4WD, 15,000 miles on rebuilt motor 1986 Chevrolet, 3/4 ton, V8, automatic 1976 Dodge Club Cab with snow plow HOPPER BOTTOMS 2005 FarmMaster steel tandem axle hopper bottom, 28', ag hoppers, spring ride, 11-22-5 on steel 1996 Cornhusker hopper bottom, 40’, ag hoppers, 20” electric sunrisers, new tires, brakes, drums, and S-cams 1993 Wilson aluminum hopper bottom, 43'x78” sides, 24.5s on steel discs 1992 Timpte Super Hopper hopper bottom, 42'x96"x84” sides, air ride, roll tarp, new tires, 11-22-5 on aluminum 1977 Cornhusker aluminum hopper bottom, 40', roll tarp, 24.5s on steel discs 1994 Red River live bottom trailer, 42' SPRAYER, COMBINE & HEADER TRAILERS Tandem axle sprayer trailer, 45'x12' wide, 5th wheel, 3,200 gal. & 1,000 gal. poly water tanks, (2) 100 gal. inductor/mixers, 3" Honda powered transfer pump with hose, LED Donahue tandem axle combine trailer, 40,000 lb., pintle hitch, spring ride, folding ramps 1994 Bison double combine trailer, 53’, titled, VINTPSMN933551 Farris tandem axle folding header trailer, used for 30' heads SSR Pump single pole header trailer, 30' (2) Header trailers, 36', lights, fenders, new Header trailer, 25', running gear style EZ Trail header trailer, 25'
DRY VANS (2) 1989 Fruehauf single axle dry vans, 28', roll-up doors 1989 Great Dane dry van, 53' 1973 Fruehauf dry van, 45' Enclosed semi van, 28' 1996 Fruehauf van trailer, 48’, for parts/storage only STOCK TRAILERS Blair gooseneck, 7'x18' New CM steel, 7’x16’, 52,000 lb. 1978 Hale gooseneck steel tandem axle, 6x20 1986 WW gooseneck, 6'x16' SEMI FLATS 1999 Fontaine Infinity combo, 48'x102", spread axle tandem, air ride, sliding winches, 24.5s on steel discs 1998 Utility combo, 48'x96", spread axle tandem, 24.5s on aluminum 1995 Utility combo, 48'x96", spread axle tandem, air ride, sliding winches w/straps, 22.5s on steel discs 1996 Utility combo, 48'x96", spread axle tandem, air ride 1988 Utility, 48'x102", sliding closed tandem, 22.5s on steel discs 1992 Manac quad axle with lifting front, 48'x102", sliding winches with straps, 22.5s on aluminum (25) 1998 Wilson spread axle 48'x96" flatbed trailers, 10'2" spread axle, Hendrickson In-Track susp., 24.5 low pro rubber, 10,800 lb. empty 1994 Great Dane spread axle tandem trailer 1995 Reitnour flatbed, 45'x96", all aluminum, spread axle, air ride Dorsey steel flatbed trailer, 46', spread axle, air ride 2002 Transcraft flatbed, 48'x96", combo, spread axle 2000 Transcraft aluminum combo flatbed, 48'x102", fixed spread axle, one side box, 11R22-5 tires SEMI STEP DECKS & LOWBOYS 1999 Transcraft drop deck, 48’, alum/steel, spread axle, air ride, sliding winches, inside tie downs, alum. wheels 1998 Dynaweld single drop step deck, 48'x96”, spread axle tandem, air ride, 22.5s on aluminum 1996 Fruehauf single drop step deck, 48'x96”, spread axle tandem 1989 Lufkin single drop step deck, 48'x96”, spread axle tandem, sliding winches, 22.5s on steel discs 1991 Transcraft single drop step deck, 48'x96”, spread axle tandem, new virgin tires 2000 Aspen RGN, 48' lowboy, 29'-6" well, 70 ton, Apitong decking, 10' front deck, 8' rear, air ride, 22.5s on aluminum wheels, hookups for rear stinger, brakes & rubber 80% 1980 tandem axle lowboy trailer, 35 ton, with flip 1977 Transcraft tandem axle double drop deck SIDE & END DUMPS (2) 2004 Clement side dumps, 40' frames, 34' tubs, air ride, rear axle lift, RollRite elec. tarp system, 385-65R22.5 rubber on aluminum 1991 Montone frameless aluminum end dump, 38', swing back door, air ride, dump valve, 11-24-5s on spoke wheels, new brakes, cams, drums 1984 Fruehauf tri-axle with air lift, end dump, 35' with 32' tub, 3-way endgate, box vibrator, one yr. on brakes REEFERS 1998 Trailmobile reefer, 48'x102", sliding tandem axle, Carrier unit, corrugated floor, 24.5 tires 1996 Utility reefer trailer, 53'x102" wide, tandem dual sliders, air ride, ThermoKing unit with 15,000 hrs. 1990 Utility reefer trailer ENCLOSED TRAILERS
2007 Interstate enclosed car hauler, 24', bumper hitch, V-neck with drop down back door & side door, maroon 2004 Continental cargo trailer, 20’, rear ramp door, side door, electric brakes, emergency breakaway 2000 Qualifier enclosed tandem axle trailer, 36'x102", 7'5" interior height, 48" side door, 12v & 110v power, drop down tailgate with beavertail, 12,000 lb. dead pull winch with remote 1996 Interstate tandem axle enclosed trailer, 15’, 3,500 lb. ea. axle, rear & side doors, electric brakes, emergency breakaway WW enclosed tandem axle trailer, 20’, rear & side doors, 12,000 gvwr, electric brakes, emergency breakaway Gooseneck enclosed trailer, 26'x8-1/2', white, double door, 8,000 lb. axles 2008 Haul Max enclosed trailer, 8x16, New
OTHER TRAILERS 2004 L&L flatbed trailer, 24', full hyd. tilt bed, power winch, 14,000 lb. Econoline tandem axle flatbed trailer, 25-1/2', spring ride, 30 ton, used for equipment hauling, pintle hitch 2001 ABU car trailer, 16', 7,000 lb., slide-in ramps 2007 Bear Track aluminum trailer, 2-wheel, 65"x120", 2' sides & ramp Load Trail TD20FD70ET tilt bed trailer, power tilt New Load Trail gooseneck trailer, 24', 14,000 lb. gvw, dovetail with 2 stand-up ramps (2) New Load Trail gooseneck trailer, 32', 22,000 lb. gvw, dovetail, heavy specs, flip over ramps New Load Trail gooseneck trailer, 32', 22,000 lb. gvw, dovetail, heavy specs, flip over ramps New Load Trail tilt trailer, 20', 7,000 lb., steel floor, hyd. up & down 1993 Macl tandem axle trailer, 18', ramps, 12,000 lb. rating 2001 PJ gooseneck trailer, 25', two 7,000 lb. electric brake axles, red 1988 SCHM tandem axle, curtain side trailer, 36'x84" steel floor, 22.5 tires, all steel wheels, steel composition, lift gate, excellent for water tanks 2002 Road King skid steer trailer, 14', 7,000 lb. rating, new deck, black 2003 SledBed snowmobile trailer, aluminum salt shield, tie downs, 13" tires, ski track, traction mats 1996 SledBed trailer, 12' 1979 Thor tri-axle gooseneck trailer, 28', 4' dovetail, 9,000 lb., electric winch Wisconsin equipment trailer, 13'6"x8', tilt deck, pintle hitch 1942 shop-built gooseneck trailer, 30 ton, military style, 16', new axles & lights Shop-built tri-axle trailer, 24', pintle hitch, 4' beavertail with ramps Pup trailer, 400 bu. 2002 Triton ATV side load trailer Tilt bed snowmobile trailer, 4x8 Shop-built tandem trailer, 16', tilt bed Steel/wood combination flatbed with headache rack to fit standard size Ford pickup (2) 1969 Entyre insulated tandem axle aluminum tanker trailers 1958 shop-built lowboy trailer, 31’
AIR DRILLS 1999 Case-IH air seeder, 40', double disc opener, hyd. markers, All run monitor, new hoses last year, 2 years on discs, Case-IH 2400 tow between cart, twin 240 bu., 8" hyd. fill auger, hyd. fan, 23-1-26 Diamond tires Great Plains GP1079K air drill, 45', twin commodity tank, solid packer wheel, shank-style, S/NGP1173K Great Plains GP1079K air drill, 34', twin commodity tank, solid packer wheel, shank-style, S/NGP1242K 1998 JD 1860 air drill, w/JD 1900 350 bu. pull behind cart, has JD 1890 boots, 2,000 acres on discs & boots 1996 JD 730 air drill, 40' disc, 6" space, double harrow, sidearm markers, 230 bu. JD 787 commodity cart, tow between, hyd. fill auger, single owner PLANTERS 2001 JD 1780 planter, 24x22", 3 bu. boxes, 750 liquid fertilizer tank, variable rate drive, SeedStar monitor, corn & bean discs, JD 777 tow-behind commodity cart, 170 bu., plumbed for on demand fill 1998 Kinze 2700, front-fold, 36x20", 1.6 bu. hopper box ext., monitor, markers JD 7300 MaxEmerge, 12x22", 3 pt., lift assist, 1.6 bu. box, corn discs, 200 monitor JD 7100, 12x22" JD 7100, 12x30", vertical fold, lift assist, liquid fertilizer JD 7000, 8x30" White 6122, 12x30", vertical fold PLOWS & PACKER IHC 800 auto reset plow, 8-bottom Brillion packer, 17-1/2' Case-IH mtd. plow, 6x18" IHC mtd. plow, 5x14" Dearborn plow, 2-bottom Moline antique plow, 3-bottom, very complete with coulters TILLAGE EQUIPMENT 2004 JD 2210 field cultivator, 49’ 6”, pull-type, floating hitch, 6” spacing, accu depth, walking tandems, 5-bar spike harrow, S/NN02210X000333 2003 Wil-Rich V957 disc ripper, 18’, 10” points, Gates harrow, S/N455042 Case-IH 4900 field cultivator, 40', walking tandems, 4-bar Flexi-Coil harrow Wil-Rich field cultivator, 38', 3-bar harrow, new teeth IHC vibrashank cultivator, 28' IHC vibrashank cultivator, 20' IHC 45 field cultivator, 18' King S-tine cultivator, 24', 3 pt. Alloway RTS3300 seed finisher, 34', dual crumbler JD 630 tandem disc, 32', 9" space, hyd. leveling, new blades, front gang Wil-Rich chisel plow, 26' Herman Superweeder 53' with Melroe 5-bar harrow sections Melroe harrow, 60', hyd. fold Harrow, 110', Melroe sections Herman mtd. harrow, 35' IHC 770 offset disc, 13' Freedom tandem disc, 6-1/2', 3 pt., notched blades front & rear, S/NA40780105 Summers 3-bar harrow sections Flexi-Coil harrow, 32’, 3-bar Case PTX 600 chisel plow, 41’, 650 lb. trip shanks, floating hitch SUGARBEET & ROW CROP EQUIPMENT 2007 WIC harvester, 8x22", poly grab rolls, row finder, rear scrub, new style struts, single owner, always shedded 2000 Artsway 692B, 8x22", row finder, S/N1299 Alloway defoliator, 6x22”, S/N16656 Alloway defoliator, 6x22", S/N1212 1996 Beetec defoliator, 12 row, L-knives, front drum, front gauge wheels, rear steer wheels, all updates, rotary scalpers Alloway cultivator, 12x22", rolling shields IHC rotary hoe, 44', 3 pt. JD 400 rotary hoe, 20', 3 pt. LIVESTOCK & HAY EQUIPMENT 2006 Patz TMR mixer, left hand discharge, 84" extension for unloading, chain conveyor, electronic scale, single owner 2002 Case-IH RBX561 round baler, hyd. tie, 1000 PTO, approx. 7,500 bales, S/N1528 2000 NH BR940 big square baler, hyd. pickup, moisture monitor, 2 bale accumulator, 600-55R-22.5 tires JD 510 round baler NH 499 haybine Deutz Allis KS200 hay rake Brady pull-type hay conditioner, PTO Bearcat 1260 mixer mill, hyd. drive, hay table, electronic scale Gehl 7335 feed/mix wagon 1982 Betterbuilt single axle honey wagon, 1,300 gal. Gehl 95 feed grinder Knight 330 mixer wagon, scale & conveyor NH 355 mixer mill, needs work (5) New hay lumber tarps, 27'x24', 9' flap on one side, black (15) New hay lumber tarps, 27'x24', 9' flap on one side, red (80) 20' sections CF new continuous fence, 6-bar with connectors & clips Posthole auger, 3 pt., 540 PTO Bale fork, 3 pt. Fiberglass hog waterer, 100 gal. Hog feeder, 12 hole Mighty Handy cattle chute (5) Livestock gates Apache hay wagon, 24’ (3) Smidley Steer Stuffer cattle feeders, 3 ton Osborne portable scale (6) Spools used crane hoist cable no longer usable for lifting but good fencing material AUGERS Westfield MK130-91, 91'x13", PTO, swing hopper 2002 Westfield MK, 91'x13", low pro swing hopper Feterl auger, 78’x12”, side auger Westfield MK, 71'x10" with 2 yr. old Mast Production Pit Express swing out drive over hopper system Westfield MK, 61'x10", swing out hopper Brandt auger, 60'x10", mechanical swing hopper, PTO, blue Rapat conveyor, 14' with 8" belt Rapat conveyor, 15' with 7" belt Speed King conveyor, 11' with 11" belt, 1 hp motor Westfield endgate drill fill auger Wheatheart transfer auger, 10", 2 hyd. motors Conveyor, 12' with 9" belt & motor GRAIN HANDLING EQUIPMENT Conveyall BTS240 seed tender, double compartment, Honda gas engine Handlair 555 grain vac, piping & cleanup kit Neuero 675 vacuvator, 1000 PTO, tubes & ends Hi-Cap grain screener with screens (2) Hutchinson rotary screen grain cleaners Rotary drum cleaner, 36", single phase Keho natural air drying system, blower, tubing for (4) bins Sukup stirator for 21' dia. bin, complete with 3 vertical augers & electric motors (2) Vane 12" axial bin fans with motor & transitions (2) Caldwell bin fans, 230 volt Bin fan, 14", 1.4 hp (2) Bin fans, 12", 1 hp Westgo new-style bin sweep ext., 3' (2) Bin transitions for 12" fan (3) Grain spreaders for bins Aeration tubing, (10) 12"x3' Aeration tubing, (8) 12"x4' Auger hopper Hyd. takeout power head, 7", for 18' bins 12" to 14" transition and through bin mount (3) 12" through bin mount transitions (2) 7" bin takeout tubes for 18' bins, mounting plates Drill fill tubes Sukup bin fan, 30”, with new motor Heated dryer HandleAir blower Snowco grain cleaner, 8’ Sectional grain drag auger Hutchinson 36” rotary drum cleaner, single phase, with auger MOWERS Bush Hog batwing mower, 15' Woods 3180 batwing mower, 15' Woods 315 batwing mower Farm King finishing mower, 3 pt. 1991 Gehl 521 trailing sickle mower, 9' Woods 59 belly mower, mounts for IHC B 2009 JD HX15 doublebat pull type mower, 15' SCRAPERS, LAND PLANES, BLADES, DITCHERS 2004 Miskin D19 pull scraper, 19 yd., S/N21671 Caterpillar 70 direct mount scraper, 15 yd., hyd. conversion 2003 Torque 1014D direct mount scraper, 14 yd., hyd. push off, hitch for JD Pull-type box scraper, 12', new Pull-type box scraper, 10', new Eversman land plane, 42' long, 12' bucket Heavy-duty tilt blade, 8', 3 pt. KeeWay rotary ditcher, 3 pt., 540 PTO Rotary ditcher, 3 pt. Scraper, 2 yd. Ashland PS155 scraper, 15-1/2 yd., direct mount LAWN & GARDEN 1988 JD 855, 24 hp, hydro, 72" mower deck, 1,295 hrs., S/N1475161 2003 Simplicity Broadmoor lawn tractor (2) 2001 Snapper LE lawn tractors, 14 hp, 38" deck Toro GM327, cab, SB, deck Big Mow lawn tractor, elec. start Briggs Herd broadcast spreader, 3 pt. Lawn cart, 4-wheel Bagger for riding lawnmower MC 519 grass catcher, fits JD mower Spreader, 3 pt. SNOWBLOWERS Alloway SB96, hyd. spout, 3 pt. Erskine, V-type, 7', 540 PTO Erskine, 5-1/2', wing, 3 pt., 540 PTO Feterl, 8', double auger Hiniker, front-mount, 8', hyd. chute, off IHC 966 JD 832 walk-behind Kubota T2541, front hyd. Lilliston, V-type push/pull snowblower, 3 pt. McKee 750, 3 pt., 2-stage McKee, 8', 2 stage, hyd. spout, 3 pt., 540 PTO McKee, hyd. spout, 3 pt., 540 PTO Noma, 10 hp, 33" cut Schulte, front-mount, 1000 PTO, mounts for 2 wheel or MFWD Schulte, 96", 3 pt., 1000 PTO Loftness 108, 3 pt., 1000 PTO Rear-mount, single stage Snowblower, 40" single stage, fits 22 hp Yard King lawn tractor, S/N579788 Snowblower, 2 stage, 96" McKee 7’, PTO STALK CHOPPERS 2007 Wil-Rich flail chopper, 22', drawn, 1000 PTO, S/N457557 Wil-Rich shredder, 3 pt., 22', L-knife, 1-3/4 PTO, 4 gauge wheels 1999 Alloway stalk chopper, 20', 3 pt., S/N24107 Brent stalk chopper, 30', hyd. fold, trailing OTHER EQUIPMENT Jackson swather transport P&H 2804A 4-wheel running gear, (6) front springs, 12L-15 tires, S/N74340 John Blue mechanical nitrolator (2) 24 outlet NH3 manifolds with stands (2) Tecumseh gas engines, 10 hp, new, elec. start Concord soil sample probe 5th wheel dolly Galvanized irrigation pipe, 2"x21' Set tractor chains, 13-6-28 rears (2) Base, (9) Johnson radios with brackets & antennas (2) Motorola CM200 radios, new in boxes CONSTRUCTION ITEMS 2008 Sweepster front-mount broom (2) Scoot Crete ride-on power buggies, 1 yd. Sullair compressor, 150 cfm, older unit Jumping jack Plate tamper Construction site office, 10x32, trailer needs some work Scaffolding for lift, 4'x12' (2) 10' ext. forks for lift (3) Sets 6' scaffolding (2) Aluminum planks for scaffolding (5) Lineman harnesses TANKS & PUMPS Wayne 440 DC10-1 free-standing 2-sided diesel pump Gasboy free-standing gas pump Honda 3" pump, 11 hp Bulk fuel filling pump hose & nozzle, (Marlow pump) Pleasure Products 2,000 gal. tank 1,400 gal. water tank (3) 1,000 gal. upright poly water tanks 500 gal. fuel tank on skids 560 gal. portable fuel tank, high volume 1" electric pump, hose & nozzle, new generator to power pump Fuel service tank, 2 comp. with toolboxes, hand pump & hose Aluminum service unit, 90 gal. tank & toolbox Pickup saddle tank with toolbox on top 240 gal. mix tank 35 gal. cone tank 70 gal. cone tank Demco saddle tanks, 250 gal., brackets, always shedded Approx. (19) fuel tanks, various sizes, with & without pumps SHOP EQUIPMENT Airco Dip-Cor 300 wire feed welder Alkota hot water power washer, 220v Coleman air compressor, electric, 5 gal. Coleman LP heater, 70,000 btu, for trailer or bunk house with floor discharge Midland Door new garage door, 9' high x 8' wide, new rail system Pro-Tech table saw, 10" Pro-Tech miter saw, 10" Ryobi miter saw Sun fuel oil shop furnace Tool Shop router Trane heat pump for home, 2 ton unit Wagner 110v power painter Wild Thing chainsaw, 16" Winco late model generator, PTO, 25,000 watts, 104 amps, 100 amp plug, on 2-wheel cart Winpower generator, 12,000 watt, PTO Winpower 12 kw PTO generator on cart Winch, 110v (8) Insulated door panels, 28'x8', 3" foam Generator, 4,000 watt (2) 20' ext. ladders Asst. misc. lumber Single hung window, 4' high x3' wide, new Fiberglass stepladder, 6' (2) Roofing nailers Level, 6' Router table with router attached Tote box for pickup box Bench model drill press, 5 spd. Car ramps Chain hoist, 1 ton (4) Generator, 8000 watt, 4-stroke, elec. start, roll cage & wheels (2) Commercial grade diesel generators, 6800 watt, EPA approved, electric start, 4 stroke, low oil alert system (6) Retractable air hose reels, 50', max working pressure 300 psi (3) Chain hoists McCullough portable generator frame PTO generator, 27,000 watt Devilbiss portable generator, 5,000 watt Hobart welder (2) Lincoln Union carbide welders Fabstar 4030 arc welder Lincoln Idealarc R35 welder Lincoln FTC W27 welder Coleman Powermate portable generator, 6,250 watt Coleman Vertex portable generator, 5,500 watt Wood lathing machine Curtis horizontal air tank Vertical air tank Metal service rack with casters Power washer parts Pallet (9) fluorescent light fixtures, 9’ with bulbs All steel work table on wheels, 3'x5' 1998 IR air compressor, 185 cfm, JD diesel, bumper hitch, 1,782 hrs. 5th wheel dolly, needs welding VEHICLES & RECREATION 1998 GMC 3500 Bluebird bus, 5.7 liter Vortec, automatic, 20 passenger cap., est. weight 7,350 lbs., 188,000 to 210,000 miles, starts & runs good 2000 Pontiac Montana extended van, 6 cyl., automatic, buckets, new tires, 157,000 miles, white 1995 Jeep Cherokee, 4-door, 6 cyl. 4 liter, 4WD, 140,000 miles 1992 Mercury Grand Marquis, 4 door, V8, 160,000 miles 1986 Oldsmobile Delta 88, 4-door, weak transmission 1985 Chevrolet Monte Carlo, V6, automatic 1982 Chevrolet Camaro Indy Pace car, T-tops, 305 engine, automatic on floor, grey/blue, new dual exhaust 1998 Polaris Indy XCR440 snowmobile 1995 Bayliner boat, 19'6", 4.3 inboard engine, cracked head Cabin, 8x16 with loft, perfect for hunting or dryer shack (2) Childrens' playhouse cabins, 6x10, with porches & lofts Fish house, retractable axle, 8-hole, front storage bay, rear cargo doors Heald Hauler Mark HX4660 ATV, gas, 2x4, newer motor, 800 lb. box load 1997 Yamaha Venture 600 snowmobile, 2-up, rebuilt 2109 engine, backrest, reverse, driver & pass. Handwarmers, rear view mirrors 2000 Polaris XCSP500 snowmobile, 1,911 miles 1998 Arctic Cat ZL440 snowmobile, approx. 1,900 miles, runs good 1988 JD AMT600 utility vehicle
PARTS (2) ThermoKing Tri-Pacs (2) Aluminum headache racks Unused Cummins N14 engine 3rd axle, air up/down (2) GMC long box pickup boxes Camoplast 16" tracks, JD 8000T Series, approx. 40% (24) JD wind guards Schwartz HP2203 truck hoist Fargo markers JD concave for 9400 or 9500 Series combine Hyd. cylinder, 5x30", one broken end, great for log splitter Tractor seat, complete, for Case-IH 2290 Set camper mirrors, fit 1999-2005 Chevrolet & GMC, fit over existing mirror (15) Pallets of asst. electric motors, gas engines, misc. parts Add-on bottom for IHC plow, 7-bottom (4) Pallets of pallet racking & beams Several pallets electric motors & gear reducers Set truck fenders Cab for JD 4020 Asst. rolls heavy rubber conveyor belting Set of JD fenders for 4020 (2) hyd. cylinders, 5"x52" (2) Pusher axles (55) Steel press wheels from IHC 8500 hoe drill Eaton Fuller T14607B truck trans., 7-spd., good takeout, Spec 84025063 Eaton RS402 rear truck differential, 4/11 gear ratio, good takeout Eaton DS402 front truck differential, 4/11 gear ratio, good takeout NH3 rear-mount cultivator hitch Reeves MAS51 gear box with motor Curtis CRV200 vacuum pump Approx. 20 pallets asst. electric motors, gas engines, misc. Single cyl. truck hoist (2) Storage boxes, 8’, for flatbed pickup
TIRES (75) 22.5 & 24. 5 tires (4) Sets (16) 445/22.5 Super Singles on aluminum rims Armstrong duals, 20-8-38 with hubs for IHC 86 Series (3) Goodyear 18-4-42 tires (8) Goodyear 20-8-42 tractor tires, 40% Michelin triples, 530/85R38, for Case-IH 9300 Series 4WD, 90% tread (24) Pallets misc. tires 18-46-46 drivers & duals for JD 14-9-46 duals (4) Aluminum rims, 16", fits 1999 GMC or Chevrolet Band duals, 12x38 with hardware General GR78-15 tire on 5-bolt GM rim Goodyear Wrangler P265/75R16 tire on 6-bolt GM rim (2) Sets band duals, 18-4-34 & 15-5-38 Set of Ford 33" tires with Rally rims Misc. tires & rims, approx. 50% on pallet (2) Single rib 11.25-28 rim & tires (2) 10:00-20 tires & rims 9:00-20 tire & rim (2) JD 11.00-16 front tires & rims Set car tires on rims (30) misc. implement tires on rims MISC. ITEMS Bulldog antique fanning mill, great for corn burners IHC stationary engine Barrows wood handcart Spinks Paddle Dash Pot Toledo platform scale (2) Old platform scales (3) Large coal shovels with wheels (3) Bulk oil tanks with hand pumps (2) Overhead garage doors, 9’x7’, w/electric openers (4) Dog kennel panels 4’x4’ building AGIRON 53 CONSIGNMENT EVENT |
||
|
|
||
Auctioneer's Notes
|
||
Disclaimer
|
||
